Some ponits which can improve your packaging

August 27, 2018

During the design process of food packaging bags, many times due to small inattention, the final food packaging bags are not well-formed, such as cutting to the pattern or text, or poor convergence, color cut in many cases because of some design In the mistakes. When we confirm the design of the food packaging bag manuscript, we should pay attention to a few small knowledge to help you customize the food packaging.

Now let us check some points we should pay attentions to so that we will be more professionals:

The first point: the pattern, text, etc. on the design surface of the food packaging bag must be 1 cm away from the cutting edge, so as not to be cut when cutting. Text must be curved or framed. Don't use system words for text. If you use it, it will cause white nodes in the staggered part of the stroke. After the text is turned into a curve, please pay attention to whether there is any skipping or overlapping error between words or lines. Do not use overprinting in black text.

The second point: The design color of food packaging bags cannot be requested by the color of the screen or printer. The customer must decide the color of the packaging by referring to the percentage of CMYK chromatography. At the same time, note that the CMYK chromatograms produced by different manufacturers are influenced by factors such as the materials used, the type of ink, and the printing pressure, and there will be differences in the same color patches.

The third point: in the same food packaging design, the colors will be different in different times of printing. The color difference is normal within 10% (because the ink volume control will be different each time), the big machine prints, and misses the others. If there is an old file to be printed, in order to avoid the color difference is too large, we can only refer to the digital color sample produced by the company. The color differences that occur in different printed products may not be used as reasons for return.

The fourth point: The design of manuscripts for food packaging bags does not need to draw crosshairs and cutting lines. Two invisible wireframes can be used to create the size and bleeding line of 92mm×56mm, and after cutting, it is 90mm×54mm (that is, each side is left with 1mm). Bleeding). If special sizes are required, please specify in the order and in the uploaded documents.

The fifth point: The color value of the shading or base map design of the food packaging bag should not be less than 10%, so as to avoid rendering the finished product.

Poprzedni

Następny

Combal Us

Autor:

Mr. Michael Shea

E-mail:

michael@mstpack.com

Phone/WhatsApp:

+86 15015013003

Wszystkie produkty

Aktualności Company